Fujitsu SPARC M12-1 Installation Manual page 82

Secure the cables to the cable support.
4.
While leaving extra length, secure the cables connected to the PCIe card to the
cable support.
Attach a core to each supplied power cord, and connect the cord to a power
5.
supply unit.
a. Insert the power cord so that it fits into the groove of the core. Pinch the core
Figure 4-9 Core Attachment Location
90 mm (3.5 in)
b. Insert the power cord straight into the power supply unit (A in
Figure 4-10 Power Supply Unit Locations
A
Note - Do not connect to an outlet at this point.
72 Fujitsu SPARC M12-1 Installation Guide ･ June 2021
closed until its latch is secured.
Attach the core at a location 90 mm (3.5 in) from the end of the power cord
connector. (See Figure 4-9.)
all the way.
Figure 4-10)