Fujitsu SPARC M12-1 Installation Manual page 56

Figure 3-5 Removing the Slide Rail
FRONT
Attach the inner rail removed in step 3 to the side of the chassis.
5.
The left and right inner rails are the same.
a. Align the insertion holes of the inner rail with the pins on the side of the
b. Press and slide the inner rail toward the rear of the chassis.
c. The latch clicks when the inner rail is secured to the chassis.
d. Confirm that the attached inner rail is firmly locked and does not come loose
e. Attach the inner rail on the other side in the same manner.
Figure 3-6 Attaching the Inner Rail
FRONT
46 Fujitsu SPARC M12-1 Installation Guide ･ June 2021
A
chassis.
by shaking it gently.
A
REAR