Fujitsu SPARC M12-1 Installation Manual page 69

Figure 3-24 Attaching the Cable Support Brackets
REAR
D
Figure 3-25 Securing a Cable Support Fixing Bracket and Rail
Mounting
area (2U)
REAR
d. After attaching the cable support fixing brackets, confirm that the rack door
can close.
Note - If the door cannot close because the cable support fixing bracket or the cable support
protrudes from the rear of the rack, do not attach the cable support bracket. However, secure
the rail to the rack with two M6 screws.
Secure the rail sides by tightening the screws loosened in step 4 (A in
7.
3-26).
2U center
1U center
Chapter 3 Installing the System
Figure
59