Fujitsu SPARC M12-1 Installation Manual page 65

Figure 3-18 Screws on the Sides of Rails
FRONT FRONT
Attach the rail to the rack.
5.
The letter [R] on a side of a rail indicates that the side is the front right side, and
[L] indicates that the side is the front left side.
This step differs depending on the shape of the supporting column holes of the
rack. Perform the work appropriate to the shape of the supporting column holes
of the rack.
For racks with supporting columns having square holes
■
a. From the rear of the rack, insert the rail protrusion into 1U top in the front
supporting column of the rack.
b. Pull out the rail to as far as the depth of the rack.
c. Insert the rail protrusion into 2U top in the rear supporting column of the
rack.
d. Secure the rail with one M6 screw to the front supporting column of the rack.
The fixing location is 2U bottom.
e. Attach the other rail in the same manner.
B B
Chapter 3 Installing the System
FRONT FRONT
55