Set The Wi-Fi Direct - Kyocera ECOSYS P5026cdw Service Manual

2RB/2RC/2RD/2RF/3R6
(7-3) Set the Wi-Fi Direct
setting Wi-Fi Direct enables you to print from the Wi-Fi Direct environment. The configuration methods are as follows:
Set the Connection from the Operation Panel on the Machine
Connecting to Computers or portable Devices that Support Wi-Fi Direct
1 Display the screen.
1 [OK] key > [A] [▼] key > [Wi-Fi Direct setting] > [►] key
2 Enter the administrator ID, select [OK] key.
Enter that ID is the number of one to sixteen digits.
Select [A] or [▼] key, and enter the numerical values.
If you select [◄] or [►] key, the entering position moves left and right.
The default of administrator ID in the factory shipment is set 2600 or 2100.
3 Enter an administrator password, and select [OK] key.
Enter that a password is the number of 0(No setting) to sixteen digits.
Select [A] or [▼] key, and enter the numerical values.
If you select [◄] or [►] key, the entering position moves left and right.
The default of administrator password in the factory shipment is set 2600 or 2100.
4 [A] [▼] key > [Wi-Fi Direct] > [OK] key
2 Configure the settings.
[A] [▼] key > [On] > [OK] key
3 Restart the network.
[OK] key > [A] [▼] key > [Wi-Fi Setting] > [►] key > [A] [▼] key >
[The restart of the network] > [OK] key > [OK] key
4 Specify the machine name from the computer or handheld device.
If a confirmation message is appeared on the operation panel of the machine, select [Yes].
The network between this machine and the computer or handheld device is configured.
2-20