2RB/2RC/2RD/2RF/3R6
(1-2) MP tray paper feed/ paper conveying section
The MP tray can load 50 sheets paper (80 g/m2). The paper on the MP tray is fed by rotating the MP paper feed roller
while lifting up the MP bottom plate by the MP solenoid. Multi-feeding is also prevented by the effect of the MP sepa
ration pad.
The paper conveying section conveys paper to the transfer and separation section. The fed paper is conveyed to
where it turns the registration sensor on by the MP paper feed roller, and then, conveyed to the transfer and separa
tion section by the registration rollers.
Components parts
1. MP paper feed roller
2. MP separation pad
3. MP friction plate
4. MP bottom plate
5. MP paper width guides
6. MP cover
7. MP conveying roller A
8. MP conveying pulley A
9. MP actuator
(MP paper sensor)
10. MP conveying roller B
11. MP conveying pulley B
12. MP conveying guide
Figure 3-27
5
Figure 3-28
3-26