2RB/2RC/2RD/2RF/3R6
(6-2) Detaching and reattaching the high voltage PWB
Procedures
1. Open the rear cover (a).
2. Detach one screw (b) (M3*8P tight).
3. After twisting the right rear cover (c), release two
back of the protrusions (d), remove in the direction
of the arrow.
Figure 4-174
4. After twisting the left rear cover, release two protru
sions (b), remove the left rear cover (a) in the direc
tion of the arrow.
Figure 4-175
4-92