2RB/2RC/2RD/2RF/3R6-1
(3-2) Detaching and reattaching the secondary transfer roller
Procedures
1. Open the rear cover (a).
2. Release the front and rear hook of the secondary
transfer unit (b) by using a flat-head screwdriver (c).
3. While turn the secondary transfer unit(b) in the
direction of the arrow, remove in the upper direction.
4. Check the secondary transfer unit (b) and clean or
replace it.
5. Reattach the parts in the original position.
Figure 4-29
Execute the following setting after replacing the secondary transfer unit.
1. Set the ID correctional operation.
: [System menu/Counter] key > [Adjustment/Maintenance] > [Calibration]
2. Adjust the color printing position.
: [System menu/Counter] key > [Adjustment/Maintenance] > [Color Registration] > [Auto]
4-16