Detaching And Refitting The High Voltage Pwb - Kyocera FS-C5150DN Service Manual

(4) Detaching and refitting the high voltage PWB

Procedure
1. Remove the top cover (see page 1-5-3).
1. Remove the right rear cover and right
cover (see page 1-5-5).
2. Remove the FFC from the high voltage
PWB.
3. Remove the screw.
4. Release eight hooks and then remove
the high voltage PWB.
5. Check or replace the high voltage PWB
and refit all the removed parts.
Figure 1-5-50
Hook
Hook
Hook
Figure 1-5-51
1-5-34
High voltage PWB
FFC
Screw
High voltage PWB
Hook
Hook
Hook
2KT/2KV