Chapter 2
2.9 Frequency Control
Frequency Control
Auto Detect DIMM / PCI Clk
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The Choices: Enabled (default), Disabled.
CPU Host / PCI / Spread Spec.
This item allows you to select CPU Host Clock (CPU / PCI).
If unfortunately, the system's frequency that you are selected is
not functioning, there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed))
as "ON" status. All the CMOS data will be loaded as
defaults setting.
Method 2: Press the <Insert> key and Power button simultaneously,
after that keep-on pressing the <Insert> key until the
power-on screen showed. This action will boot-up the
system according to FSB of the processor.
2-34
BIOS Setup