Biostar M7VKQ User Manual page 62

Chapter 2
Blank Screen
DPMS Support
Modem Use IRQ
This determines the IRQ, which can be applied in MODEM use.
The Choices: 3 (default), 4, 5, 7, 9, 10, 11, NA.
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has "hung."
The Choices: Delay 4 Sec, Instant-Off (default).
Wake Up Events
If you highlight the literal "Press Enter" next to the "Wake Up Events" label and
then press the enter key, it will take you a submenu with the following options:
VGA
When set to On, any event occurring at a VGA port will awaken a
system which has been powered down.
The Choices: OFF (default), ON.
LPT & COM
When set to On, any event occurring at a COM(serial)/LPT (printer)
port will awaken a system which has been powered down.
The Choices: NONE, LPT, COM, LPT/COM (default).
HDD & FDD
When set to On (default), any event occurring at a hard or floppy drive
will awaken a system which has been powered down.
The Choices: ON (default), OFF
buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
2-25
BIOS Setup