Biostar M7VKQ User Manual page 63

Chapter 2
PCI Master
When set to On, any event occurring at PCI will awaken a system
which has been powered down.
The Choices: OFF (default), ON.
PowerOn by PCI Card
When you select Enabled, a PME signal from PCI card returns the
system to Full ON state.
The Choices: Disabled (default), Enabled.
Wake Up On LAN/Ring
To use this function, you need a LAN add-on card which support power
on function. It should also support the wake-up on LAN jump.
Disabled (default)
Enabled
Modem Ring Resume
To use this function, you need a LAN add-on card which support power
on function. It should also support the wake-up on LAN jump.
The Choices:
Disabled (default)
Enabled
RTC Alarm Resume
When "Enabled", you can set the date and time at which the RTC
(real-time clock) alarm awakens the system from Suspend mode.
The Choices: Disabled (default), Enabled.
Date (of Month)
You can choose which month the system will boot up. This field is only
configurable when "RTC Resume" is set to "Enabled".
Resume Time (hh: mm: ss)
You can choose the hour, minute and second the system will boot up.
This field is only configurable when "RTC Resume" is set to
"Enabled".
Primary INTR
When set to ON (default), any event occurring at Primary INTR will
Wake up on LAN/Ring not supported
Wake up on LAN/Ring supported
Wake up on LAN/Ring not supported.
Wake up on LAN/Ring supported.
2-26
BIOS Setup