Frequency/ Voltage Control - Biostar PT880 Pro-A7 DDR2 Manual

9 Frequency/ Voltage Control

Figure 9. Frequency/ Voltage Control
CPU CLOCK RATIO
The Choices: 8X (default), 9X, 10X, 11X, 12X, 13X, 14 X, 15X, 16X, 17X,
18X, 19X, 20 X, 21 X, 22 X, and 23X.
CPU Voltage Regulator
This item allows you to select CPU Voltage Control.
The Choices: Default (default)
DDR Voltage Regulator
This item allows you to select DDR Voltage Control.
The Choices: 1.8V, 1.9V, 2.0V, 2.1V.
CPU Clock
This item allows you to select CPU Clock, and CPU over clocking.
If unfortunately, the system's frequency that you are selected is
not functioning, there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed))
Method 2: Press the <Insert> key and Power button simultaneously,
※ It's strongly recommended to set CPU Vcore and clock in
default setting. If the CPU Vcore and clock are not in default
setting, it may cause CPU or M/B damage.
PT880 Pro-A7 DDR2
as "ON" status. All the CMOS data will be loaded as
defaults setting.
after that keep-on pressing the <Insert> key until the
power-on screen showed. This action will boot-up the
system according to FSB of the processor.
38