Biostar M7VKQ User Manual page 9

Biostar m7vkq motherboard: user guide
Hide thumbs Also See for M7VKQ:
Table of Contents

Advertisement

Chapter 1
LAN Built-in On Board
10 mb/s and 100 mb/s operation.
Compliant to PC99 standard.
Supports Wake-On-LAN function and remote wake-up.
Contains two large (2KB) independent receive and transmit FIFO's.
Supports Full Duplex Flow Control.
Integrated Fast Ethernet MAC, Physical chip and transceiver in one chip.
PCI local bus single-chip Fast Ethernet controller.
Compliant to PCI Revision 2.2
Supports ACPI, PCI power management
Uses 93C46 (64*16-bit EEPROM) to store resource configuration, ID
parameter, and VPD data.
Supports LED pins for various network activity indications.
Half/ Full duplex capability.
Built in VGA:
General Graphic Capabilities
64-bit Single Cycle 2D/3D Graphics Engine
Real Time DVD MPEG-2 and AC-3 Playback
Video Precessor
I²C Serial Interface
Integrated 24-bit 230MHz True Color DAC
Extended Screen Resolution up to 1600x1200
Extended Text Modes 80 or 132 columns by 25/30/43/60 rows
Graphics Performance
Sustained 1M polygons/second and 100M pixels/ second
30fps DVD playback of 9.8M bps MPEG-2 video with 30% headroom
Hoast Based AC-3 decode at only 8% utilization
High Performance rCADE3D
32 entry command queue, 32 entry data queue
4kbyte texture cache with over 90% hit rates
Pipelined Single Cycle Setup/ Texturing/ Rendering Engines
DirectDraw
TM
Accelerator
TM
acceleration
1-4
Motherboard Description

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents