Frequency/ Voltage Control - Biostar 945PL-M7 Setup Manual

945PL-M7 BIOS Manual

9 Frequency/ Voltage Control

Figure 9. Frequency/ Voltage Control
CPU CLOCK RATIO
The Choices: 8X (default), 9X, 10X, 11X, 12X, 13X, 14 X, 15X, 16X, 17X,
18X, 19X, 20 X, 21 X, 22 X, and 23X.
CPU Voltage Regulator
This item allows you to select CPU Voltage Regulator
The Choices: Default (default).
DDR Voltage Regulator
This item allows you to select DDR Voltage Regulator
The Choices: 1.8V(Default).
CPU CLOCK
This item allows you to select CPU Clock, and CPU over clocking.
Special Notice:
If unfortunately, the system's frequency that you are selected is not
functioning, there are two methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as "ON"
status. All the CMOS data will be loaded as defaults setting.
32