Biostar M7VKQ User Manual page 61

Chapter 2
Doze Mode/ Suspend Mode
The item allows you to select the suspend type under ACPI operating
system.
The Choices: Disabled (default), 1 Min, 2 Min, 4 Min, 6 Min, 8 Min,
Suspend Mode
When enabled and when after the set time of system inactivity, all devices except
the CPU will be shut off.
The Choices: Disabled (default), 1 Min, 2 Min, 4 Min, 6 Min, 8 Min,
ACPI Suspend Type
The item allows you to select the suspend type under the ACPI operating system.
The Choices: S1 (POS) (default)
PM Control by APM
The Choices:
No
Yes (default)
Video Off Option
This field determines when to activate the video off feature for monitor power
management.
The Choices: Suspend→ → → → Off (default), Always on, All Modes→Off.
Video Off Method
This option determines the manner in which the monitor is goes blank.
The Choices:
V/H SYNC+Blank
10 Min, 20 Min, 30 Min, 40 Min.
10 Min, 20 Min, 30 Min, 40 Min, and 1Hour.
S3 (STR)
System BIOS will ignore APM when
power Management is on.
System Bios will wait for APM's prompt
before it enters any PM mode.
(default)
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video
2-24
BIOS Setup
Power on Suspend
Suspend to RAM