Biostar M7SUA User Manual
Biostar M7SUA User Manual

Biostar M7SUA User Manual

Biostar m7sua motherboard: user guide
Hide thumbs Also See for M7SUA:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

M
7
S
U
A
M
7
S
U
A
M
7
S
U
A
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are
designed
to
provide
reasonable
protection
against
harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in
a particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied
of
warranties
merchantability or fitness for any purpose. Further the vendor reserves
the right to revise this publication and to make changes to the contents
here of without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without
first obtaining the vendor's approval in writing.
The content of this user's manual is subject to be changed without notice
and we will not be responsible for any mistakes found in this user's
manual. All the brand and product names are trademarks of their
respective companies.
i

Advertisement

Table of Contents
loading

Summary of Contents for Biostar M7SUA

  • Page 1 FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits designed provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 2: Table Of Contents

    DDR DIMM Modules: DDR1/ DDR2 ... 6 Installing DDR Module... 6 Jumpers, Headers, Connectors & Slots... 6 ESPAÑOL...12 Características del M7SUA ... 12 Contenido del Paquete... 13 Cómo instalar un Puente... 13 Instalación del CPU ... 14 Módulos DDR DIMM: DDR1/ DDR2 ... 14 Instalación del Módulo DDR ...
  • Page 3: Layout Of M7Sua

    Layout of M7SUA JKBMS1 CPU1 JUSBV2 JUSB1 JCOM1 JPRNT1 Winbond JVGA1 JUSBLAN2 JUSBV3 BIOS JAUDIO JGAME1 PCI1 Codec PCI3 ※NOTE: ●represents the first pin. JCFAN1 SIS 740 BAT1 FDD1 SIS 962L JWOL1 PCI2 JUSB2 JCI1 JUSBV1 JCMOS1 JATXPWR1 IDE2 IDE1...
  • Page 4: Component Index

    Component Index Winbond BIOS Codec A. 5V/5VSB Selection for USB (JUSBV2) B. Back Panel Connectors C. Front Audio Header (JAUDIO1) D. Audio Modem Riser (AMR1) E. Floppy Disk Connector (FDD1) F. CD-ROM Audio-In Header (JCDIN1) P. Frequency Selection (JCLK1) G. CD-ROM Audio-In Header (JCDIN2) Q. Hard Disk Connectors (IDE1-2) H.
  • Page 5: English

    English M7SUA Features A. Hardware Provides Socket A. Supports the single AMD ® for Athlon processors. Front Side Bus at 200/ 266/ Fuzzy333 MHz. Chipset North Bridge: SIS 740. South Bridge: SIS 962L Main Memory Supports up to 2 DDR devices.
  • Page 6: Package Contents

    6 USB2.0 ports. (front*2 + rear*4) Front Side I/O Header Front side audio header. Front side USB headers. Dimensions Micro ATX Form Factor: 19.1 X 22.9cm (W X L) B. BIOS & Software BIOS Award legal BIOS. Supports APM1.2. Supports ACPI. Supports USB Function.
  • Page 7: Cpu Installation

    CPU Installation Step1: Pull the lever sideways away from the socket and then raise the lever up to a 90-degree angle. Step2: Look for the white dot/cut edge. The white dot/cut edge should point towards the lever pivot. The CPU will fit only in the correct orientation. Step3: Hold the CPU down firmly, and then close the lever.
  • Page 8: Ddr Dimm Modules: Ddr1/ Ddr2

    The first hard drive should always be connected to IDE1. Peripheral Component Interconnect Slots: PCI1-3 This motherboard is equipped with 3 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI Total Memory...
  • Page 9 slot is designated as 32 bits. Audio Modem Riser Slot: AMR1 (Only support slave card) The AMR specification is an open Industry Standard Architecture and that defines a hardware scalable riser card interface, which supports audio and modem only. Front Panel Connector: JPANEL1 PWR_LED JPANEL1 (+) (-)
  • Page 10 Wake On LAN Header: JWOL1 JWOL1 Power Connectors: JATXPWR1 JATXPWR1 5V/ 5VSB Selection for USB (optional): JUSBV1/ JUSBV2/ JUSBV3 JUSBV1/ JUSBV2/ Assignment JUSBV3 Pin 1-2 close +5V_SB Pin 2-3 close Assignment +5V_SB Ground Wake up Assignment Assignment +3.3V +3.3V +3.3V -12V Ground Ground...
  • Page 11 Clear CMOS Jumper: JCMOS1 JCMOS1 Pin 1-2 Close Pin 2-3 Close The following procedures are for resetting the BIOS password. It is important to follow these instructions closely. ※ Clear CMOS Procedures: 1. Remove AC power line. 2. Set the jumper to “Pin 2-3 close”. 3.
  • Page 12 Front Panel Audio Header: JAUDIO1 JAUDIO1 Assignment Mic In Mic Power RT Line Out Reserved LFT Line Out RT Line In LFT Line In Digital Audio Connector: SPDIF_OUT1 SPDIF_OUT1 GAME Header: JGAME1 (optional) JGAME1 Assignment GPSB1 GPX2 MIDI-OUT GPY2 GPSB2 MIDI-IN Assignment Ground...
  • Page 13: Back Panel Connectors

    CD-ROM Audio-In Header: JCDIN1/ JCDIN2 JCDIN1/ 2 Frequency Selection: JCLK1 (optional) CPU Clock 100MHz 133MHz Note: Frequency Selection for Fuzzy333 MHz is selected throught BIOS setup. Back Panel Connectors Mouse Parallel Keyboard COM1 JKBMS1 JUSB1 JCOM1 Assignment Left Channel Input Ground Ground Right Channel Input...
  • Page 14: Español

    Español Características del M7SUA A. Hardware Proporciona Socket A. Soporta single AMD ® para procesadores Athlon Duron Front Side Bus 200/ 266/ Fuzzy333 MHz. Chipset North Bridge: SIS 740. South Bridge: SIS 962L Memoria Principal Soporta hasta up to 2 DDR devices.
  • Page 15: Contenido Del Paquete

    6 puertos USB2.0 (frontal*2 + traseros*4) Cabezal del lado frontal I/O Cabezal frontal de audio. Cabezal frontal USB. Dimensiones Factor de Forma Micro ATX: 19.1 X 22.9 cm (W X L) B. BIOS & Software BIOS Award legal BIOS. APM1.2. ACPI.
  • Page 16: Instalación Del Cpu

    Instalación del CPU Paso 1: Empuje la palanca hacia afuera del socket y levante la palanca hasta un ángulo de 90 grados. Paso 2: Fíjese por el punto blanco o márgen cortado. El punto blanco o márgen cortado debería apuntar hacia el pivote de la palanca. La CPU solamente se fijará en una sola correcta orientación.
  • Page 17: Instalación Del Módulo Ddr

    requerido. DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulos DIMM (contactos 184) Total del Tamaño de Memoria con Unbuffered DIMMs Localización del DIMM Socket DDR1 64MB/128MB/256MB/512MB/1GB DDR2 64MB/128MB/256MB/512MB/1GB ***Solamente para referencia*** Instalación del Módulo DDR Abra una ranura de DIMM presionando el clip de retención hacia afuera.
  • Page 18 Interconexión del Componente Periférico, y es un bus estándar para tarjetas de expansión. Ésta ranura PCI está diseñado con 32 bits. Ranura Audio Módem Riser: AMR1 (Solamente soporta tarjeta esclava) AMR es una industria estándar de arquitectura abierta en el que define interface de tarjeta hardware escalable soportando solamente audio y módem.
  • Page 19 +5V(fused) USBP3+ JUSB2 Cabezal Wake On LAN: JWOL1 Contactos JWOL1 Conector de Corriente: JATXPWR1 Contac JATXPWR1 +5V(fused) USBP3- USBP2- USBP2+ Tierra Tierra Asignación +5V_SB Tierra Wake up Asignación Contac Asignación +3.3V +3.3V +3.3V -12V Tierra Tierra PS_ON Tierra Tierra Tierra Tierra Tierra PW_OK...
  • Page 20 5V/ 5VSB Selección para USB (opcional): JUSBV1/ JUSBV2/ JUSBV3 JUSBV1/ JUSBV2/ Asignación JUSBV3 Contactos 1-2 close +5V_SB Contactos 2-3 close Puente de Borrar CMOS: JCMOS1 JCMOS1 Contacto 1-2 Close Contactos 2-3 Close Los siguientes procesos son para reiniciar la contrasena del BIOS. Es importante que siga los s i g u i e n t e s p a s o s c u i d a d o s a m e n t e .
  • Page 21 3. Espere 5 segundos. 4. Fijar el Puente en el “contacto 1-2 close”. 5. Encienda AC. 6. Reconfigure la contraseña deseada o borre datos CMOS. Conector de la Carcasa Abierta: JCI1 (opcional) Contactos JCI1 Cabezal del Panel de Audio Frontal: JAUDIO1 Contac- Asignación Entrada del Mic...
  • Page 22 Cabezal de Juego: JGAME1 (opcional) JGAME1 Contac- Asignación GPSB1 GPX2 MIDI-OUT GPY2 GPSB2 MIDI-IN Cabezal de Entrada de Audio CD-ROM: JCDIN1/ JCDIN2 Contac- JCDIN1/ 2 Selección de Frecuencia: JCLK1 (opcional) CPU Clock 100MHz 133MHz Nota: Selección de Frecuencia para Fuzzy333 MHz se selecciona por medio de la Configuración del BIOS.
  • Page 23 Back Panel Connectors Mouse Parallel Keyboard COM1 JKBMS1 JUSB1 JCOM1 Line In/ Surround Speaker Out Mic In/ Bass&Center JVGA1 JUSBLAN2 JAUDIO...
  • Page 24: Deutsch

    Deutsch Spezifikationen von M7SUA A. Hardware Unterstützung für Sockel A. Unterstütz den Einzel AMD Prozessor. FSB mit 200/266/Fuzzy333 MHz. Chipsatz Northbridge: SIS 740. Southbridge: .SIS 962L. Hauptspeicher Unterstützung für 2 DDR Geräte. Unterstützung für 200/266/Fuzzy333 MHz(ohne ECC) DDR Geräte. Die maximale Speichergröße ist 2GB.
  • Page 25: Verpackungsinhalt

    Unterstützung für PS/2-Maus und PS/2-Tastatur. 6 USB2.0-Ports. (Vorderseite x 4 + Rückwand x 2) Vorderseite-I/O-Header Vorderseite Audio Header. (Front side audio header) Vorderseite USB Header. (Front side USB header) Abmessungen Mikro ATX Form-Factor: 19.1 X 22.9cm (W X L) B. BIOS & Software BIOS Award legal Bios.
  • Page 26: Installation Der Cpu

    Installation der CPU Schritt 1: Ziehen Sie den Hebel seitlich vom Sockel weg. Heben Sie den Hebel dann in 90-Grad-Winkel nach oben. Schritt 2: Suchen Sie nach der scharfen Kante, die auf Drehpunkt des Hebels weisen muss. Die CPU passt nur, wenn sie richtig ausgerichtet ist. Schritt 3: Drücken Sie die CPU fest in den Sockel und schließen Sie den Hebel.
  • Page 27: Ddr-Dimm-Modules: Ddr1/ Ddr2

    Die IDE-Anschlüsse können eine Master- und eine Slave-Festplatte verbinden, so dass bis zu 4 Festplatten angeschlossen werden können. Die erste Festplatte sollte immer an IDE1 angeschlossen werden. Peripheral Component Interconnect Slots: PCI1-3 Dieses Motherboard ist mit 3 standardmäßigen PCI-Slots ausgestattet. PCI steht DDR-Modul Speichergröße (MB)
  • Page 28 für Peripheral Component Interconnect und bezieht sich auf einem Busstandard für Erweiterungskarten, Schnittstellen ersetzt hat. Dieser PCI-Slot ist für 32 bits vorgesehen. Audio Modem Riser Slot: AMR1 (unterstützt nur Slave-Karte) Die AMR-Spezifikation ist eine “offene Industrie-Standard-Architektur” und AMR wird als ein skalierbares Riser-Karte-Interface von Hardware definiert , das nur Modem und Soundfunktion unterstützt.
  • Page 29 JUSB2 Wake On LAN Header: JWOL1 JWOL1 Stromversorgungsanschluss: JATXPWER1 JATXPWR1 Auswahl von 5V/ 5V_SB für USB (optional): JUSBV1/ JUSBV2/ JUSBV3 JUSBV1/ JUSBV2/ Beschreibung JUSBV3 Pin 1-2 geschlossen +5V_SB Pin 2-3 geschlossen Masse Masse Schlüsse Kein Beschreibung +5V_SB Masse Wake-up Beschreibung Beschreibung +3.3V +3.3V...
  • Page 30 Jumper zum Löschen CMOS: JCMOS JCMOS Pin 1-2 geschlossen Pin 2-3 geschlossen Die folgende Schritte leiten Sie, das Kennwort für BIOS-System zurückzusetzen. Es ist wichtig, die Anweisung zu folgen. ※ Prozeduren zum Löschen des CMOS: 1. Ausschalten Sie den AC-Netzstecker. 2.
  • Page 31 Front Panel Audio Header: JAUDIO1 JAUDIO1 Beschreibung Mikrofon-Eingang Mikrofon-Betriebsspannung Recht Line-Out Reserviert Link Line-Out Line-In RT Line-In LFT Digital Audio Anschluss: SPDIF_OUT1 SPDIF_OUT1 Game Header: JGAME1 (optional) Beschreibung GPSB1 GPX2 MIDI-OUT GPY2 GPSB2 MIDI-IN Kein Beschreibung Masse Audio-Spannung Recht Line-Out Schlüsse Link Line-Out Line-In RT...
  • Page 32 CD-ROM Audio-In Header: JCDIN1/JCDIN2 JCDIN1/2 Frequenz Auswahl: JCLK1 (optional) CPU Takt 100MHz 133MHz Anmerkung: Frequenz Fuzzy333 MHz bitte wählen Sie Fuzzy333 in „BIOS-Setup-Menü“ Anschlüsse für die Rückwand Beschreibung Link-Kanal Eingabe Masse Masse Recht-Kanal Eingabe PIN 1-2 geöffnet geschlossen...
  • Page 33: Trouble Shooting

    Trouble Shooting PROBABLE No power to the system at all Power light don’t illuminate, fan inside power supply does not turn on. Indicator light on keyboard does not turn on PROBABLE System inoperative. Keyboard lights are on, power indicator lights are lit, hard drive is spinning.
  • Page 34: Solución De Problemas

    Solución de Problemas CAUSA PROBABLE No hay corriente en el sistema. La luz de corriente no ilumina, ventilador dentro de la fuente de alimentación apagada. Indicador de luz del teclado apagado. CAUSA PROBABLE Sistema inoperativo. Luz del teclado encendido, luz de indicador de corriente iluminado, disco rígido está...
  • Page 35: Problemlösung

    Problemlösung MÖGLICHE URSACHE Das System hat keine Spannungsversorgung. Die Stromanzeige leuchtet nicht, der Lüfter im Inneren Stromversorgung wird eingeschaltet. Tastaturleuchten sind nicht an. MÖGLICHE URSACHE System funktioniert nicht. Tastaturleuchten sind an, die Stromanzeige leuchtet, die Festplatte dreht sich. MÖGLICHE URSACHE Das System wird von der Festplatte nicht hochgefahren, vom CD-ROM-Treiber aber ja.
  • Page 36 04/24/2003...

This manual is also suitable for:

M7vkq pro

Table of Contents