Connection to Printer
1
P l a c e t h e f e e t o f t h e
rewinder (2 places) into
the positioning holes on
the joint plate.
2
Insert the FG terminal
into the earth terminal
on the side panel, and
then fix it.
Phillips screwdriver
is necessary.
Insert and attach the FG
t e r m i n a l b e t w e e n t h e
screw and crow washer
and the rewinder .
15
3
P l a c e t h e f e e t o f t h e
printer (2 places) into the
positioning holes on the
joint plate.
4
Connect the EXT cable to the EXT
terminal of the printer.
For the position of the EXT
terminal, refer to the operating
manual of the printer
Example where the printer
used is CL400e.
16