Installing Or Replacing The Display Panel Assembly - IBM J15 Manual

For more information about the power supply indicators, see "5U92 disk enclosure LEDs and
indicators" on page 45.

Installing or replacing the display panel assembly

You can replace the display panel assembly in a 5U expansion enclosure.
About this task
This task assumes that the following conditions were met:
• The expansion enclosure was moved out from the rack on the slide rails, as described in "Removing a
5U92 disk enclosure from a rack" on page 69
• The top cover was removed, as described in "Removing the top cover" on page 21.
• The display panel assembly was removed, as described in "Removing the display panel assembly " on
page 95.
Procedure
1. Remove the display panel assembly, which is shown in Figure 59 on page 61, from its packaging.
60 IBM Cloud Object Storage System
™
Version 3.15.6: J15 Appliance Manual