IBM J15 Manual page 120

Figure 90. Remove fascia components from the expansion enclosure
Remove the bottom (1U) fascia
3. Gently pull on each side of the PSU fascia to remove it from the chassis, as shown in Figure 90 on page
92. The PSU fascia disengages from the slot and pin that connect it to each side of the chassis.
You must remove the bottom fascia to access and service either PSU. However, as Figure 91 on page
93 shows, you do not have to remove the front fascia.
™
92 IBM Cloud Object Storage System Version 3.15.6: J15 Appliance Manual