Removing The Display Panel Assembly - IBM J15 Manual

Figure 93. Removed power supply
6. If you are instructed to return the power supply, follow all packaging instructions. Use any packaging
materials for shipping that are supplied to you.
Replace the power supply
7. To reinstall the PSU, or replace it with one from FRU stock, follow the procedure in "Installing or
replacing a power supply " on page 57.

Removing the display panel assembly

You can remove the display panel assembly from a 5U expansion enclosure.
Procedure
1. Slide the expansion enclosure out of the rack, as described in "Removing a 5U92 disk enclosure from a
rack" on page 69.
2. Remove the top cover, as described in "Removing the top cover" on page 21.
3. Press the release tab at the top of the display panel assembly, as shown in Figure 94 on page 96.
Chapter 3. Maintaining the system hardware 95