D
S
EVICE
ETUP
SAM Card
Front Panel
SAM Card
CAUTION
Installing or
Replacing SAM Card
16
T650
I
P
NSTALLATION
Figure 3
T650p (Front Panel)
The front panel offers the following features:
•
The T650p device has a colored touch screen display.
•
A smart card reader is built into the front of the device to process smart card-
based debit or credit transactions. For directions on how to use a smart card,
see
Using the Smart Card
•
A magnetic card reader built into the device for performing debit or credit card
transactions. The card can be swiped from either direction. To ensure a proper
read of the magnetic swipe card, insert the magnetic card from the side of the
device as shown in
•
Contactless Reader and EMV have dedicated LEDs lower to the left of the
display for contactless payments. For directions on how to conduct contactless
transactions, see
•
A 3.5 mm audio jack to facilitate accessibility for the visually impaired.
When you first receive your T650p, you may need to install one or more SAM
cards, or you may need to replace old cards. You may need to install one or two
Multiple Security Access Module cards or replace an old one.
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. Verifone recommends
using a grounded anti-static wrist strap.
To install or replace SAM cards:
1
Power off the device.
2
Place the device face down on a soft and clean surface.
3
Remove the back cover of the unit.
G
UIDE
Reader.
Figure
11.
Using the Contactless
Reader.