Display Section; Inputs Section; Effects Section; Take Button - Barco PDS User Manual

2. Hardware Orientation
PDS Front Panel
map=cêçåí=m~åÉä
The figure below illustrates the PDS front panel:
Main Menu
> In Auto Acquire
Input
Output
Figure 2-1. PDS Front Panel
1)
2)
3)
Following are descriptions of each front panel section:
1)
2)
3)
4)
5)
8
1
SEL
ON
>>
Adjust
ESC
>>

Display Section

Inputs Section

Effects Section

Display Section
The Display Section includes a four-line display, the ADJUST knob and two
"menu navigation" buttons: SEL and ESC. Refer to the
heading on page 9 for complete details.
Inputs Section
The Inputs Section includes ten "source" buttons that enable you to select inputs
and a full screen LOGO. Refer to the
complete details.
Effects Section
The Effects Section provides three buttons that enable you to select the type of
effect that you want to perform next. Refer to the
page 11 for complete details.

Take Button

The red TAKE button initiates a transition to the selected source. Refer to the
"Take Button" section on page 12 for details.
USB Port
The USB port can be used for upgrading system firmware. Refer to the
"Upgrading Firmware Using the USB
2
Inputs
4
1 2 3 5 6
FRZ BLACK
Effects
3
4)
Take Button
5)
USB Port
"Inputs Section" heading on page 10 for
"Effects
Port" section on page 96 for details.
PDS-701
SDI
LOGO
TAKE
4
5
"Display
Section"
Section" heading on
PDS • User's Guide