Table of Contents
Advertisement
BEFORE APPLYING SILICON WAX POLISH. DO NOT POLISH MATT-PAINTED
SURFACES WITH POLISHING PASTE. THE VEHICLE SHOULD NEVER BE
WASHED IN DIRECT SUNLIGHT, ESPECIALLY DURING SUMMER, OR WITH THE
BODYWORK STILL HOT AS THE CAR SHAMPOO CAN DAMAGE THE PAINT-
WORK IF IT DRIES BEFORE BEING RINSED OFF.
CAUTION
04_51
DO NOT USE WATER (OR LIQUIDS) AT TEMPERATURES OVER 40°C (104°F)
WHEN CLEANING THE VEHICLE PLASTIC PARTS. DO NOT AIM HIGH PRES-
SURE AIR/WATER JETS OR STEAM JETS DIRECTLY TO THE FOLLOWING
PARTS: WHEEL HUBS, CONTROLS ON THE RIGHT AND LEFT SIDE OF THE
HANDLEBAR, BEARINGS, BRAKE PUMPS, INSTRUMENTS AND GAUGES, EX-
HAUST SILENCER, IGNITION SWITCH/STEERING LOCK. DO NOT USE ALCO-
HOL OR SOLVENTS TO CLEAN ANY RUBBER OR PLASTIC SADDLE COMPO-
NENTS: USE WATER AND MILD SOAP.
CAUTION
DO NOT USE SOLVENTS OR PETROL BY-PRODUCTS (ACETONE, TRICHLORO-
ETHYLENE, TURPENTINE, PETROL, THINNERS) TO CLEAN THE SADDLE. USE
INSTEAD DETERGENTS WITH SURFACE ACTIVE AGENTS NOT EXCEEDING
5% (NEUTRAL SOAP, DEGREASING DETERGENTS OR ALCOHOL).
DRY THE SADDLE WELL AFTER CLEANING.
CAUTION
DO NOT APPLY PROTECTIVE WAX ON THE SADDLE AS IT MAY BECOME SLIP-
PERY.
113
Advertisement
Table of Contents
