Genie Z-51/30J Service And Repair Manual page 47

October 2020
4 Remove the pin retaining fasteners from the
master cylinder barrel-end pivot pin.
5 Place a rod through the barrel-end pivot pin
and twist to remove the pin.
6 Remove the pin retaining fastener from the rod-
end pivot pin.
7 Place a rod through the rod-end pivot pin and
twist to remove the pin.
8 Remove the master cylinder from the machine.
Crushing hazard. The master
WARNING
cylinder could become
unbalanced and fall if not
properly attached to the
overhead crane.
Part No. 1268553GT
Primary Boom Components
Z®-51/31J
Service and Repair Manual
37