Genie Z-51/30J Service And Repair Manual page 24

Service and Repair Manual
Repair Procedures
About This Section
Most of the procedures in this section should only
be performed by a trained service professional
in a suitably equipped workshop. Select the
appropriate repair procedure after troubleshooting
the problem.
Perform disassembly procedures to the point
where repairs can be completed. Then to re-
assemble, perform the disassembly steps in
reverse order.
Symbols Legend
Safety alert symbol—used to
alert personnel to potential
personal injury hazards. Obey all
safety messages that follow this
symbol to avoid possible injury or
death.
Indicates an imminently
DANGER
hazardous situation which, if not
avoided, will result in death or
serious injury.
Indicates a potentially hazardous
WARNING
situation which, if not avoided,
could result in death or serious
injury.
Indicates a potentially hazardous
CAUTION
situation which, if not avoided,
may cause minor or moderate
injury.
Indicates a potentially hazardous
NOTICE
situation which, if not avoided,
may result in property damage.
Indicates that a specific result is expected after
performing a series of steps.
Indicates that an incorrect result has occurred
after performing a series of steps.
14 Z®-51/31J
October 2020
Part No. 1268553GT