Safety; General Safety Notes - Invacare LiNX DLX-REM400 User Manual

2 Safety

2.1 General safety notes

WARNING!
Risk of injury or damage to the mobility device
Do not install, maintain or operate this equipment
before you have read and understood all the
instructions and all the manuals for this product
and all other products that you use or install
together with this product.
– Follow the instructions in the user manuals.
WARNING!
Risk of serious injury or damage to the mobility
device or surrounding property
Wrong settings can make the mobility device
uncontrollable or unstable. An uncontrolled or
unstable mobility device can cause an unsafe
situation such as a crash.
– Performance adjustments must only be made
by qualified technicians or by persons who
completely understand the programming
parameters, the adjustment process, the
configuration of the mobility device and the
capabilities of the driver.
– Performance adjustments must only be made
in dry conditions.
1637423-H
WARNING!
Risk of injury or damage due to electrical shorts
Connector pins on cables connected to the power
module can still be live even when the system
is off.
– Cables with live pins should be connected,
restrained or covered (with non-conductive
materials) so that they are not exposed to
human contact or materials that could cause
electrical shorts.
– When cables with live pins have to be
disconnected, for example, when removing the
bus cable from the remote for safety reasons,
make sure to restrain or cover the pins (with
non-conductive materials).
CAUTION!
Risk of injury from hot surfaces
Remote module can get hot when exposed to
strong sunlight for long periods.
– Do not leave mobility device in direct sunlight
for long periods.
Risk of damage to the connector pins
If you touch the connector pins, they can become
dirty or they can be damaged by electrostatic
discharge.
– Do not touch the connector pins.
Safety
7