Invacare LiNX DLX-REM400 User Manual page 14

Invacare® LiNX
your remote are Mouse Mover and Switch Control. By
default, these functions are disabled. Contact your provider
to change the configuration.
The mouse mover allows you to control the cursor on a PC
or laptop's screen with a user input on the wheelchair, such
as the joystick on the remote module or an external joystick.
Switch control is an accessibility feature that allows you to
navigate and select items on your iOS or Android device
using the remote's joystick or touch screen.
For more information about Connectivity cards and how to
use them, see 5.20 Connectivity Cards, page 75.
Utility Card
Fig. 3-9 Example of a
three-quadrant (3Q) navigation
utility card
Utility card allows you to operate system controls (such as
lighting functions and horn) as well as control outputs with
14
Fig. 3-10 Example of a
four-quadrant (4Q) navigation
utility card
external inputs. The utility card function is suitable for both
three-quadrant (3Q) and four-quadrant (4Q) inputs.
Utility card allows you to operate two controls / outputs
per quadrant, according to the duration that the user input
is activated:
• A Short press /
Momentary press,
and
• B Long press.
By default, this function is only enabled for chair
configurations with an external control input that will not
allow the control of horn or lights. Contact your provider
to change the configuration and to set up your desired
operations.
For an example how to use an utility card in daily use,
see 5.15 Operating Lighting Functions and Horn via Utility
Function Card, page 63.
Fig. 3-11
1637423-H