Swipe-And-Tap Mode - Invacare LiNX DLX-REM400 User Manual

Invacare® LiNX
•

swipe-and-tap mode,

• tap-only mode and
• control inputs (CI).
With each method you navigate through profiles and
functions by moving from an active function card to an
adjacent function card.
Direct navigation is not performed with an active
user input (e.g. remote), since the active user input
is used to operate the active function card only
(e.g. moving the remote to drive). Instead, the user
navigates through the profiles and functions using
the touch screen or other control inputs.
5.4.1 Swipe-and-Tap Mode
Changing Function Cards
1.
Swipe over screen or tap navigation button to open
card preview display.
2.
Swipe left or right to change function cards.
3. Tap on selected function card, tap navigation button or
wait for a few seconds to activate selected function card.
32
Fig. 5-27
Fig. 5-28
Changing Profiles
1.
Profile 1
Profile 2
Profile 3
Profile 4
Swipe up or down to activate another profile.
Fig. 5-29
Fig. 5-30
Fig. 5-31
Fig. 5-32
1637423-H