Invacare LiNX DLX-REM400 User Manual page 113

E This setting controls the amount of time the Left and
Right Click switch must be held before it will latch.
Once the latch is no longer required, press the Right
Click or Left Click switch for the same length of time
to deactivate the latch.
F Switch 11 and 12 should be in the DOWN position
when using with the Head Array for 3 switch mouse
emulation.
G OFF: Original mouse speed, better for PC.
ON: Increases mouse speed by 1/3, better for MAC.
Numbers 0 to 6 describe the action the mouse should
perform. Letters A to F describe the direction of the input,
which leads to the mouse action.
1637423-H
Fig. 5-165
Number
0
1
2
3
4
5
6
The following adjustments are examples only and can be
adjusted to your needs by your provider.
Input direction
A Reverse
B Left
C Right
D Forward
E Left click
F Right click
Input direction/Mouse action (0–6) cannot be
duplicated in any two switches, except for zero.
Mouse action
No change
Down
Left
Right
Up
Right click
Left click
Mouse action
No change
Left and right mouse direction
Up and down mouse direction
Left click
No change
No change
Usage
113