Graco 17G807 Operation And Parts page 24

Appendix A — User Setup Display
Setup Setup Screen Setup Screen 3 3 3 Screen
Setup Screen 3 enables the user to scroll through all
errors and clear the entire error log. The error log will
display the most recent error on the top of the list.
Refer tot he following table for more information.
Icon Icon Icon Function Function Function
Error Number Number
Error Error Number
The first column lists the error number.
Once the system has more than the
maximum errors allowed, then the oldest
error will be over-written.
Maximum: 20
Error Code Code
Error Error Code
The second column lists the error codes
(see Error Codes, page
Maximum: 20
Time Time Time
The third column shows the time that the
error occurred since the unit was last
powered on. The time will always start
at 0:00 when the system is powered up.
This time will be logged as code ELCX.
Format : Hours : Minutes
Maximum: 23:59
Reset Reset Reset
Press the Reset icon to clear the entire
error log.
24
Set Set Password Set
NOTE: When the password is "0000" the setup NOTE: NOTE:
screens can be accessed without entering a
password.
1. Navigate to Setup Screen 2.
2. Press
3. Press
4. Press
5. Press
15).
6. Press
NOTE: The password screen is shown when the
NOTE: NOTE:
setup screens are accessed and the password
function has been enabled by changing the 0000
password.
NOTE: If you set and forget the password, please
NOTE: NOTE:
contact Graco Technical Assistance for a default
password.
Password Password
to access fields to make changes.
to navigate to the password field.
Press to edit data.
and to increment or decrement
to the desired digits of the password.
to accept the password or press
to cancel.
to exit edit mode.
3A3320D