Last Number Dialed - Lucent Technologies Definity 8434DX User Manual

To dial a call to a member
of your Dial Intercom
group
To answer any intercom
call

Last Number Dialed

To automatically redial
the last number you
dialed (extension, outside
number, or trunk/feature
access code)
To see the number you
last dialed (you must be
on-hook)
1
While off-hook, press
2
Dial the group member's 1- or 2-digit code
Intercom ring is sent
1
Pick up the handset and press
You are connected to the call
Note: If you are active on another call, first
press Hold , then press the
flashing light.
1
While on-hook or off-hook, press
or Dial the Last Number Dialed access code
__________ (while off-hook)
Number is automatically dialed (up to 20 digits)
Note: Available with DEFINITY Generic 2 and with
System 85 R2V4 and some R2V3 systems. Check
with your system manager to learn if the feature is
available on your system.
Limitations on this feature should be noted. Digits
dialed via Abbreviated Dialing, feature dial codes,
authorization codes, and Station Message Detail
Recording (SMDR) account codes are not retained in
memory and must be redialed for each call.
1
While on-hook, press
Last number dialed is shown on the display screen
Icom Dial xxx [dial tone]
[ringback tone]
Icom
Icom button next to the
Last Dialed
Last Dialed
27