Abbreviated Dialing (Ad) - AT&T Definity 7313H User Manual

Abbreviated Dialing (AD)

To program/reprogram
an AD button
Note: AD buttons must
first be assigned by your
System Manager.
To place an AD call
To program/reprogram
an outside number,
extension, or feature code
into a personal list
1
On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want
to program
Note: Each AD button will hold one complete phone
number or feature code.
2
Pick up handset
3
Press
Program
your voice terminal)
or Dial AD Program code ______
4
Press
AD xxxxx
5
Dial outside number, extension or feature code you
want to store
Note: If you are programming an outside number,
be sure to include a trunk code, if applicable.
6
Press (on the dial pad)
#
Number is stored
To program additional buttons, repeat Steps 3-6
7
Hang up or press
1
Press selected
Call is dialed (silently)
1
On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want
to program as items on your personal list(s) (see
example to the left)
Note: Each phone number or feature code is stored
as a separate item.
2
Press
Program
or Dial AD Program code ______
3 4
Dial Personal List number (1, 2, or 3) Dial list item (1, 2, 3...)
5
Dial number you want to store
Note: If you are programming an outside number,
be sure to include a trunk code, if applicable.
(if this button has been assigned to
to be programmed
to end programming
Drop
AD xxxxx
[dial tone]
[dial tone]
[confirmation tone]
[ringback tone]
[dial tone]
[dial tone]
[dial tone]
12