Installing Spare Bridge Board With Sas 6G Solution Option 1; Replacing Node Bridge Board; Figure 60. Installing The Bridge Board - Intel H2000WP Series Service Manual

Hardware Installations and Updates
Installing SAS 6G Solution Option 1

Replacing Node Bridge Board

1. Remove pre-installed bridge board from node tray, see Figure 59.
2. Plug in the card edge of spare bridge board to bridge slot, see letter B of
Spare Bridge BoardFigure
3. Align the plastic clip at the front of the board, see letter A.
4. Fasten the bridge board with six screws, see letter C.
36

Figure 60. Installing the Bridge Board

61.
Intel
Figure 61. Installing
®
Server System H2000WP Family Service Guide