Completing Installation - Siemens PowerLink 100 Product Information

Safety Instructions
1.6 Installation
If delivered separately, plug the power supply into the device without any modification.
²

Completing Installation

1.6.3
Set the jumpers of the module for operation mode.
²
The device shall recognize the new plug-in module.
²
In case you installed a new module, configure the settings of the new module in PowerSys.
²
NOTE
i
i
Only qualified electrical engineering personnel is authorized to reset the hardware parameters.
18 Smart Communications, PowerLink 100 and PowerLink 50, Product Information
E50405-U53-X-B3-7670, Edition 11.2014