Interconnection Of Plpa Unit And Hf-Connecting Board - Siemens PowerLink 100 Product Information

5.2

Interconnection of PLPA Unit and HF-Connecting Board

Overall Connection Diagram
The figure below shows the connection diagram from the PLPA RF connector to the HF connecting board:
[cdplhfcb-241110-01.tif, 1, en_US]
Figure 5-2
NOTE
i
i
Please make sure that the "a" and "b" conductors are not exchanged!
In case of 75 Ohm impedance, the "b" wire and GND are linked.
Smart Communications, PowerLink 100 and PowerLink 50, Product Information
E50405-U53-X-B3-7670, Edition 11.2014
Overall connection diagram from the PLE unit to the HF connecting board
5.2 Interconnection of PLPA Unit and HF-Connecting Board
The Connector Panel
39