Interconnection Of Plpa Unit And Cfs-2 - Siemens PowerLink 100 Product Information

The Connector Panel

5.1 Interconnection of PLPA Unit and CFS-2

5.1 Interconnection of PLPA Unit and CFS-2
The figure below shows the interconnection of PLPA and CFS-2 section. The SUB-D socket PLPA control on
the CFS-2 has to be connected to the corresponding PLPA control SUB-D plug on the PLPA. The Tx and Rx
BNC jacks on the CFS-2 have to be connected to the corresponding BNC jacks on the PLPA.
[sclnplcf-110111-01.tif, 1, en_US]
Figure 5-1
38
Interconnection of PLPA and CFS-2 section for PowerLink 100
Smart Communications, PowerLink 100 and PowerLink 50, Product Information
E50405-U53-X-B3-7670, Edition 11.2014