Nortel 1000E Maintenance Manual page 130

130 Replacing equipment
Figure 39
Installation Tool banner
2 Press <CR> to perform system checks.
The system verifies the RAM.
If the Signaling Server has less than 1 GB of RAM, the following
error message appears:
*** ERROR: This Signaling Server has less than 1GB
RAM.
*** In order to run Rls 5.0 and later software you
must
*** upgrade RAM to 1GB and repeat install.
q<CR>: quit and reboot
If the error message appears, press <CR> to quit. To upgrade
to 1 GB of RAM, see Signaling Server Installation and
Commissioning (NN43001-312). Start the procedure again.
The system verifies the file systems.
•
If the hard drive of the Signaling Server is not partitioned, the
file systems verification process fails and the File systems
verification failure screen appears.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 02.07 22 December 2009
Copyright © 2004-2009 Nortel Networks. All Rights Reserved.