Sony DNW-A75 Maintenance Manual page 69

(Continued)
No. ITEM
F34 STOP PINCH OFF TIME
F35 AUDIO DITHER
DNW-A75/A75P
Settings Description
0 M Specifies the time at which the pinch ON condition is kept even if the PB operation
5 M is completed in the SX tape PB mode. The time is usually set to "20 M". When
10 M "0 M" is set, the pinch is turned off as soon as the PB operation is completed.
15 M
[20|M]*
m
. When the pinch is turned off, it takes a few seconds to output image and sound
signals during PB operation of the next time.
. *: When the SY2 ROM version is earlier than 1.40, the factory setting is "5M".
[ON]
Specifies how to process the data when audio input data is recorded.
OFF ON: Processes the audio input data to be recorded by a dither method. The
result is rounded and recorded in 16 bits.
OFF: The audio input data of less than 17 bits is rounded down and recorded.
n
Set "OFF" to record a signal accurately according to the input data (i.e., record a
DOLBY AC-3 encoded signal ).
2-17. Setup Menu (F-Series)
2-31