Sony DNW-A75 Maintenance Manual page 171

SET button
A white square mark is displayed in the upper-right
position of the superimposed display when the SET button
is pressed. The unit then enters the normal operation state
(in which the normal operation of this unit except a menu
system can be performed).
However, the character information (time code or opera-
tion status) superimposed during normal operation is not
displayed in this case.
To return to the former state, press the MENU button.
MENU button
The display returns to the error logger display mode when
the MENU button is pressed with the white square dis-
played in the upper-right position of the superimposed
display.
Pressing the MENU button in the error logger display
mode terminates the error logger display mode.
Limited-display screen
For the error log of a category that is set to OFF in the
menu of setting mode (refer to Section 4-3-3), information
items other than a log number are not displayed. However,
the whole display using the F FWD button is not influ-
enced by the setting.
ERROR LOGGER
(001/004)
*
001 REEL TROUBLE-1
002 TAPE TENSION ERROR
003 INTERNAL I/F ERROR
004 REFERENCE MISSING
'98 07 03 09:23:15
Ordinary Screen
(No limited-display)
DNW-A75/A75P
ERROR LOGGER
(001/004)
*
001 REEL TROUBLE-1
002 TAPE TENSION ERROR
003 INTERNAL I/F ERROR
004
'98 07 03 09:23:10
Only Warning Turned Off
Example of display and operation
ERROR LOGGER
(001/003)
*
001 REEL TROUBLE-1
002 TAPE TENSION ERROR
003 INTERNAL I/F ERROR
'98 07 03 09:23:10
0 [SET]
ERROR LOGGER
(001/003)
*
001 REEL TROUBLE-1
002 TAPE TENSION ERROR
003 INTERNAL I/F ERROR
'98 07 03 09:23:10
0 [MENU]
ERROR LOGGER
(001/003)
*
001 REEL TROUBLE-1
002 TAPE TENSION ERROR
003 INTERNAL I/F ERROR
'98 07 03 09:23:15
4-3. Error Logger Display Mode (M2)
4-3-2. Display Mode
4-81