Sony DNW-A75 Maintenance Manual page 159

A23 : SDI/SDTI VR
AUDIO/VIDEO ADJUST MODE
A23:SDI/SDTI VR
*
A231:SDI ENC1 VCO
A232:SDI ENC2 VCO
A233:SDI DEC VCO
A234:SDTI ENC VCO
A235:SDTI-CP ENC VCO
This menu is used to adjust the VCO free-running frequen-
cy of SDI and SDTI input/output interfaces.
Five submenus (including for option) are available.
Automatic or manual adjustment can be selected.
n
The menu title of A23 may be displayed as "SDI VR".
A231 : SDI ENC1 VCO
This submenu is used for an SDI output interface (SDI
encoder).
A232 : SDI ENC2 VCO
This submenu is used for an SDI output interface (SDI
encoder) with superimpose function.
A233 : SDI DEC VCO
This submenu is used for an SDI input interface (SDI
decoder).
A234 : SDTI ENC VCO
This submenu is used for an SDTI (SX) output interface
(SDTI (SX) encoder). This submenu is displayed when the
BKNW-118 option is installed.
A235 : SDTI-CP ENC VCO
This submenu is used for an SDTI-CP output interface
(SDTI-CP encoder). This submenu is displayed when the
BKNW-124 option is installed.
DNW-A75/A75P
4-2-10. AUDIO/VIDEO ADJUST Mode (A2)
Description of superimposed display
AUDIO/VIDEO ADJUST MODE
A231:SDI ENC VCO
1
*
Manual
2
SDI ENC1 VCO
3
VCO STATUS 1
Ex.: A231 : SDI ENC1 VCO
1 The adjustment mode (manual and automatic) or the
messages during automatic adjustment are displayed in
this line.
Manual :
Auto (Push SET Button) : Press the SET button to
Auto Adjusting ... :
Auto Adjust Complete : Automatic adjustment is
Auto Adjust Failure :
n
The adjustment data can be manually changed even if
message "Auto (Push SET Button)" is displayed.
2 The adjustment item and adjustment data value are
displayed in this line.
3 The VCO status will be displayed as "0" or "1".
Change of adjustment mode
The relation between the adjustment mode and display is
shown in the table below.
Adj. mode Superimposed display Time data display area
Manual Manual
adjustment
Automatically Auto (Push SET Button) PUSH SET
adjustable
(i) Turn the search dial in REVERSE (3) direction to set
the * mark to line 1 on the superimposed display.
(In a time data display area, "MANUAL" or "PUSH
SET" will be displayed.)
(ii) Turn the search dial while pressing the JOG button.
Manual 8 Automatic: [JOG] + DIAL (2)
Manual 7 Automatic: [JOG] + DIAL (3)
4-2. TAPE Maintenance Mode (M0)
5D
Adjustment mode is set to
the manual adjustment.
initiate the automatic
adjustment.
Automatic adjustment is in
progress.
completed.
Automatic adjustment fails.
MANUAL
4-69