Rs-232 Connection Using An External Power Brick - VeriFone P200 Installation Manual

RS-232 Connection
Using an External
Power Brick
•
Configuration 2 - P200 to V200c
P200 can be powered via the V200c multi-communication port of V200c,
which also supports USB connectivity. Insert the USB cable CBL435-002-01-A
directly to the multi-communication port of V200c.
Figure 9 Connecting to V200c via Serial
A special dongle cable is used, where one end of the cable plugs into the P200
while the other end terminates in a DB-9 connector housing. On the housing, a
DC jack is provided to connect to an external power brick. This is a generic cable
for all RS232-based hosts (VPN - CBL282-031-XX-A).
Figure 10 Connecting to RS232-Based Host
Cable Connections
P200/P200 P I
LUS NSTALLATION
S
ETUP
G
UIDE 19