Usb Serial Dongle (Rs-232 Uart); Bluetooth ® Access Point (Ap) Charging Base (Bluetooth ® Interface) - VeriFone VX 680 Installation Manual

T S
ERMINAL ETUP
Examining Connection Ports
USB Serial Dongle
(RS-232 UART)
NOTE
CAUTION
®
Bluetooth Access
Point (AP) Charging
Base (Bluetooth
Interface)
22
VX 680 I
NSTALLATION
The USB Serial Dongle (VPN 24122-04-R) is designed to accomodate the RJ45
connector and it may be purchased with the VX 680 terminal. The USB Serial
Dongle can also be connected to the full-featured Base Station (see
USB Dongles to the Base
A Base Station may be purchased with the VX 680 terminal or purchased as a
separate option. The full-featured Base Station has two USB host ports for
external dongles as well as a battery charger slot for charging an extra Li-ion
battery pack. A standard Base Station does not have any USB ports and is
capable of charging the terminal only and not the extra battery pack.
The Modem Dongle and Serial Dongle are intended for use with the VX 680
terminal and Base Station only. They should not be installed or used with any
equipment other than the VX 680 terminal or Base Station.
®
The Bluetooth AP Base Station relays wireless data received from the VX 680
terminal via modem and then transmits back the response to the terminal.
®
Figure 7 VX 680 Terminal communicating with a Bluetooth
Point (AP) Charging Base
To improve the range performance of the VX 680 terminal, the Bluetooth AP Base
Station should be placed in a position that will service all of the card payment
areas in your premises. The ideal placement is to position the base station within
line of sight of all areas of card acceptance.
G
UIDE
Station).
100 meters
Attaching the
®
Access