Connecting The Pda And The Security Adapter - Motorola KVL 4000 User Manual

KVL 4000 Key Variable Loader ASTRO 25 User Guide
3 Connect the PDA to a PC using the USB Programming Cable.
Step result: For Windows XP, the ActiveSync application starts. For Windows Vista and Windows 7, the
Windows Mobile Device Center starts.
If ActiveSync or Windows Mobile Device Center do not start automatically, perform
PDA USB Mode, page 12-5
Insert the CD provided by Motorola and run the Setup.exe file to start the KVL Software Installation Wizard.
4
Step result: The End User License Agreement screen appears.
Click Accept.
5
6 In the window that appears, clear the check box next to Your device is using Enhanced Security Settings, and
click Next. The Transparent Security Settings will be applied after the KVL application reinstallation/upgrade.
During the installation process, the PDA may restart several times.
7 When the process is completed, click Next → Exit to close the KVL Software Installation Wizard.
Step result: The Transparent Security Settings are applied successfully.
8 Disconnect the USB Programming Cable from the PDA.
Connect the Security Adapter to the PDA.
9
If the Security Adapter is not detected automatically, perform
to put the PDA into the USB Host or USB OTG mode.

1.4.3 Connecting the PDA and the Security Adapter

Procedure Steps
1-12
to put the PDA into the USB Client or USB OTG mode.
12.4 Setting the
12.4 Setting the PDA USB Mode, page 12-5
6871018P37-F - January 2013