Setting Up The Administrator Password - Motorola KVL 4000 User Manual

Procedure Steps
1 On the KVL main screen, select Settings → Security → Passwords → Define passwords → Operator.
Step result: The New password and Repeat password entry fields appear.
2 In the New password entry field, type the password of your choice using the PDA keypad.
The password must contain between 15 and 30 characters, including at least 1 special character, 1
numeric character, and 1 uppercase character. The following special characters are acceptable: ! " # $
% & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~
As you type the password, dynamic hints about password rules appear.
3 In the Repeat password entry field, type the password again.
Step result: If the passwords match, the Done button is enabled.
To abort the operation at any time, tap Cancel.
4 Tap Done.
Step result: The password has been set up.
Tap Done on the consecutive screens to return to the KVL main screen.
5
If the Operator password is forgotten, the Administrator can assign a new Operator password.

2.1.4.1.2 Setting Up the Administrator Password

When and where to use:
Use these steps to set up the Administrator password.
You cannot set just Administrator or Operator passwords, but must set both, if the password feature
is desired.
6871018P37-F - January 2013

2.1.4.1.2 Setting Up the Administrator Password

2-5