Kvl 4000 Operations Through A Remote Control Head; Performing Kvl Operations Through A Remote Control Head; Setting Up Kvl For Remote Control Head Operations - Motorola KVL 4000 User Manual

8
KVL 4000 Operations Through a
Remote Control Head
Sometimes, when servicing a mobile radio's secure parameters, it can be difficult to gain access to the radio's
direct key loading port. The radio may be mounted in a vehicles trunk along with other assorted equipment or
in another equally inaccessible location.
Motorola's Remote Control Head Key loading feature allows you to remotely perform operations on a radio through
a Remote Control Head that can be mounted in a vehicles cabin.
8.1 Performing KVL Operations Through a Remote
Control Head
Process Steps
Set up your KVL for Remote Control Head operations. See
1
Operations, page
2 Provision a radio for Remote Control Head key loading. See
Head Key Loading, page
3 Connect the KVL to the Remote Control Head. See
Control Head, page
Initiate one of the operations. For details, see the appropriate chapters of this manual:
4
• Chapter 4 KVL 4000 – Loading Encryption Keys into Target Devices
• Chapter 5 KVL 4000 – Managing Keys in Target Devices
• Chapter 7 Using KVL 4000 in OTAR Systems
8.2 Setting Up KVL for Remote Control Head
Operations
Before using your KVL to perform operations on a radio through a Remote Control Head, program several security
parameters.
6871018P37-F - January 2013
8-1.
8-5.
8-6.
8.2 Setting Up KVL for Remote Control Head
8.3 Provisioning a Radio for Remote Control
8.4 Connecting the KVL to the Mobile Radio's Remote
8-1