7
On the VPN Gateway Parameters window, perform the following actions:
a. In the Gateway (Tunnel Endpoint) field, enter the IP address you obtained from the system administrator.
For systems with the Dynamic System Resilience (DSR) feature, in case of a switchover, you will
need to change the IP address to be able to contact the backup Gateway.
b. Click Next.
Step result: The Assistant for New Profile – IPSec Configuration window appears.
Figure 1-38 Assistant for New Profile – IPSec Configuration Window
6871018P37-F - January 2013
1.4.8.2 Configuring VPN Settings - KVL Connected to the Firewall Through a Network
1-39