Entering The Kvl Rsi For Remote Control Head Operations - Motorola KVL 4000 User Manual

KVL 4000 Key Variable Loader ASTRO 25 User Guide
Procedure Steps
1 On the KVL main screen, select Settings → Tactical OTAR → MNP.
Step result: A decimal keypad appears.
2 Enter the MNP using the decimal keypad.
3 When you have entered the MNP, tap Done.
If you have entered an incorrect value, the Done button is disabled.
4 Tap Done on the consecutive screens to return to the KVL main screen.
8.2.3 Entering the KVL RSI for Remote Control Head
Operations
The KVL requires a Radio Set Identifier (RSI) in order to operate in the Remote Control Head key loading mode.
8-4
• The available values range from 0 through 65535. The default value is 1000.
• As you enter the digits they appear in the info field. If you have entered a 5-digit value, the
keypad becomes disabled.
• To delete a digit you have entered, tap the < Del key, or hold it to delete all entered digits.
To abort the operation, tap Cancel.
6871018P37-F - January 2013