Table of Contents
Advertisement
3. Connect tap water braided tube on the top of water tank for
water supply as shown.
Note
: 1. Ensure water tank internal valve is OFF.
2. Suggestion: connect a temporary rubber or plastic
hose on valve, flush water supply pipeline. Ensure
water is clean, no residual sand stone or fouling
inside pipeline.
3.
1.
2.
4. According to different faceplates,there are different
installations of access panel as below.
4.
1) K-22525T-PNE/K-6283T-PNE access panel installation
1) K-22525T-PNE/K-6283T-PNE
A. Press from front
A.
a) Install the mask in the block screen of the tank, and
tighten the screw to fix the mask to the tank.
a)
b) Unplug air hose on flush valve side from air hose
connector and pull it out from the mask.
b)
B. Remote plate installation and Remote installation of
mask
B.
During remote installation, fix the cover onto the tank
and pull the air hose to the panel. Reserve access
panel at front to ensure removal and installation of
cover.
1338609-T01-B
Connecting Pipe
Water Pipe
Protective Cover
Air Hose
-6-
Mask
Screw
Water Tank
Air Hose Connector
Cover
Advertisement
Table of Contents
