Advertisement
Quick Links
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information -
consumer
.
ORDERING INFORMATION
PATIO (NEW) Skirted 3.0/4.5L Class Five +
TM
1PC Toilet
305mm ...................................................K-20171T
Include Patio Toilet Sest...................................K-20187T
PATIO (NEW) Skirted 3.0/4.5L Class Five +
TM
1PC Toilet
305mm................................................K-20171T-S
Include Patio Quiet-close Toilet Sest ...............K-20188T
PATIO (NEW) Skirted 3.0/4.5L Class Five +
TM
1PC Toilet
400mm ...................................................K-20172T
Include Patio Toilet Sest...................................K-20187T
PATIO (NEW) Skirted 3.0/4.5L Class Five +
TM
1PC Toilet
400mm................................................K-20172T-S
Include Patio Quiet-close Toilet Sest ...............K-20188T
NOTES
·
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
Seat post holes are on 140mm (5-1/2") centers.
·
51mm (2") passageway.
·
Water depth from the rim is 154mm.
·
Ensure that the new drain has the correct roughing-in
dimension. This toilet has a 305mm /400mm roughing-in
dimension.
See Fig. #1
·
Closet flange must be 305mm/400mm on-center from wall.
·
Carefully inspect the new fixture for any sign of damage.
·
For new construction, refer to the dimensions in
and Fig. #3
for locating the shut-off valve.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2013).
·
This product complies with GB/T 6952-2015 and GB
25502-2017. Water Efficiency Grade 1.
No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137
8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA POST CODE: 256410
1326100-T01-B
please leave instructions for the
.
Fig. #1
PATIO (NEW)
TM
SKIRTED 3.0/4.5L CLASS FIVE + 1PC TOILET
S-TRAP 305mm K-20171T/K-20171T-S
S-TRAP 400mm K-20172T/K-20172T-S
·
·
·
3.0/4.5
305mm....................................................K-20171T
3.0/4.5
305mm ...............................................K-20171T -S
3.0/4.5
400
mm....................................................K-20172T
3.0/4.5
400
mm ................................................K-20172T-S
·
·
·
140mm
·
51mm
·
·
305mm/400mm(
·
·
·
·
2013)
·
GB/T 6952-2015 GB 25502-2017
1
2
8
256410
©
Copyright Kohler China Investment Co., Ltd. 2018
-1-
©
INSTALLATION INSTRUCTIONS
3.0/4.5
...........................................K-20187T
...................................K-20188T
...........................................K-20187T
...................................K-20188T
154mm
1)
305mm/400mm
1
3
ASME
528137
-
(A112.19.2-
2018
Advertisement
Related Manuals for Kohler PATIO S-TRAP K-20171T
Summary of Contents for Kohler PATIO S-TRAP K-20171T
- Page 1 GB/T 6952-2015 GB 25502-2017 25502-2017. Water Efficiency Grade 1. No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137 528137 8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA POST CODE: 256410 256410 ©...
-
Page 2: Tools And Materials Required
ARNING: Risk of personal injury or product damage : Handle vitreous china products very carefully. Vitreous china can break and chip if you overtighten bolts and nuts. WARNING: Risk of external leakage . The fill valve nut has been factory-tightened to design specifications. If re-tightening is required, wrench tighten one turn past finger tight . -
Page 3: Installation
K-20172T/K-20172T-S Finished Wall Fig.#1 Kohler reserves the right to change marked dimensions without prior notice. INSTALLATION TO REMOVE EXISTING TOILET Turn off the water supply. Flush the toilet, and use a sponge to remove the remaining water from the tank and bowl. - Page 4 TO INSTALL BOWL Drain Hole Position the template and align with drain hole. Mark down the position of foot and 5 holes. Fig.#4 Drive holes on ground with the driver 10mm of 10mm (3/8"), then insert anchor to holes. 10mm Fig.#5 Install brackets.
- Page 5 Carefully thread the screws into the brackets, until toilet is secure. Alternately tighten left and right sides to prevent pulling the toilet off center. Install cap to cover screw. Do not overtighten. Bushing Screw Fig.#10 Apply caulk around base. Fig.#11 TO CONNECT WATER SUPPLY Supply Shank*...
- Page 6 FILL FLOAT WITH BALLAST Adjust the float by the cross-shaped thread and sliding it up or down on the float rod until the water level is at the marked water line. Test flush the toilet. Check all connections for leakage for several days.
- Page 7 1326100-T01-B...
-
Page 8: Consumer Responsibilities
CAUTION: Don t use any cement while installing the toilet. Heat expansion of the toilet may damage the feet of the toilet. Kohler will not be responsible for any damage because of using cement. WARNING: Risk of product damage. Do not throw into the toilet what is easy to block it, such as newspaper, paper pilch, sanitary towel.